Cordless Telephone Operation
EXAMPLE :
To store the number 115-1968 under the TELEPHONE KEYPAD
1
button:
1
- Press the
MEMO
button.
4
- Press the TELEPHONE KEYPAD
1
button.
2
- Dial 115-1968.
5
- You have stored 115-1968 under
TELEPHONE KEYPAD
1
button.
3
- Press the
MEMO
button again.
A total of 10 telephone numbers can be programmed in memory.
IMPORTANT:
The maximum number of digits that can be stored for any phone number is 16
in PULSE or TONE mode. The maximum number of digits for mixed (TONE and PULSE in
combination) dialing is 15. If you are using a switchboard system to access an outside line
(such as an 8 or 9), press the
PAUSE
button to store a PAUSE.
Recalling Stored Numbers from Memory
1.
Press the
TALK
button.
2.
Press the
MEMO
button.
3.
Press the TELEPHONE KEYPAD button for the number you have stored. The stored
number will be dialed automatically.
EXAMPLE:
To recall number 115-1968 stored under the TELEPHONE KEYPAD
1
button:
1
- Press the
TALK
button.
3
- Press the TELEPHONE KEYPAD
1
button.
2
- Press the
MEMO
button.
Redial Feature
1.
If you get a busy tone, press the
TALK
button to hang up.
2.
Later, press the
TALK
button again.
3.
Listen for a dial tone.
4 .
Press the
REDIAL
button. This will automatically redial the last telephone number you
called.
Mixed Mode (Temporary Tone) Dialing
If you only have Pulse (rotary dialing) service in your area set the TONE/PULSE select switch
at the left side of the
BASE UNIT
to PULSE position. If you want to access tone dialing mode,
press the
Temporary Tone (*)
button on the
HANDSET
and dial the desired number,
subsequent digits will be dialed into Tone mode. Pulse mode will reset after the
HANDSET
is
returned on-hook.
11