Cordless Telephone Operation
10
Receiving Calls with the HANDSET on the BASE UNIT
1.
When the phone rings, lift the
HANDS E T
.
The IN USE LED indicator will light up.
NOTE
: The
HANDSET
RINGER ON/OFF
switch must be in the “ON” position for
ringer to operate.
2.
Start your conversation.
3.
To end your conversation, either press the
TALK
button or place the
HANDSET
on
the
BASE UNIT
. If you place the
HANDSET
on the
BASE UNIT
CHARGE CRADLE, you
activate the automatic STANDBY feature.
Receiving Calls with the HANDSET off the BASE UNIT
1.
When the phone rings, press the
TALK
button. The IN USE LED indicator will light up.
2.
Start your conversation.
3.
To end your conversation, either press the
TALK
button or place the
HANDSET
on the
BASE UNIT
. If you place the
HANDSET
on the
BASE UNIT
CHARGE CRADLE, you activate
the automatic STANDBY feature.
Storing Numbers
1.
Be sure the
BASE UNIT
IN USE LED
indicator is off and the
HANDSET
is in
STANDBY mode.
2.
Press the
MEMO
button.
3.
Dial the number you want to store.
4.
Press the
MEMO
button again.
5 .
Dial the TELEPHONE KEYPAD
0~9
button where you want to store that
number. You will hear one
confirmation “beep.”
6.
Repeat steps 1 through 5 to store other
telephone numbers.
In Use
Low Batt.
VOL
REDIAL
PAUSE
TALK
MEMO
CH
MUTE
FLASH
3
VOL