SYLVANIA
Luminaires
Installation Guide
– Exit Signs
For warranty coverage
,
please register at www.sylvania.com/warrantyregistration.
www.sylvania.com
1. Do not useoutdoors
.
2.
Equipment
should be mounted securelyinlocations andat heights
w
here it
w
ill not be readilysubjected
to
tampering by
unauthorized personnel.
3.
Donotmount near gasorelectric heaters
4.
Capunused
w
ires
with enclosed w
ire nutsorother approvedmethod.
5.
Donotusethisequipmentfor anything other than
its
intendeduse
.
6
.
The
use of accessory equipment not recommended by the manufacturer
will
void product listing and
w
arranty and may cause
an unsafecondition.
7.
Disconnect AC po
w
er before servicing and
installation.
8.
Consult localbuilding code for approved
wiring
andinstallation.
9. Use caution
when
servicingbatteries
.
Battery
acid can cause
burns to
skin andeyes.
If acid
is
spilled on skin or eyes,
flush
acid
with fresh water and contact a physician
immediately.
10.Anyservice onthis equipmentshould beperformedbyqualifiedpersonnel only.
11.Makesure
w
ireterminations aresecure andleadsareproperly tuckedin appropriate
wire
channels.
E24955
When re-lamping, only use lamps specified in the exit sign. Using other lamp types may result in transformer damage
or unsafeconditions. Battery in this unit may not be fully charged. After electricity is hooked up to unit, let the
battery charge for at least 24 hours. Normal operation of this unit should then take effect (when applicable).
