5
QUICKSTART
1.3.3. Procedure for levelling the machine
There are no specific requirements for levelling the S25T machine independently. The machine sits on 3 padded feet
on the underside of the machine. When installing on to a suitable bench, its is recommended to check the level of the
stand and adjust as required for a correct installation.
1.3.4. Removing the security parts (locking for transport)
1.3.4.1. Slide unlocking
Remark : Needs to be done after the machine is settled and ready to be
used.
With the right side panel open, spot the locking part (red parts) :
Remove the locking part
before starting the part
up or risk causing serious
damage!
1) Open the panel
2) Unlock the slide locking part
Image of slide locking part
Remove red locking part by unscrewing the 4 screws using 4mm allen key.
View 1
View 2
View 3
