Sylvac 830.0150, Instructions Manual

Page: 21 / 108

21
E
Replacing the batteries
Unscrew the fixing screw at the rear of the Hi_Cal base and remove the
battery cover | ergonomic handle to change batteries.
Important : please only use NiMH rechargeable battery pack delivered by
Sylvac for battery replacement
Technical specifications Hi_Cal 150 / Hi_Cal 300 / Hi_Cal 450
Measuring range 150mm | 300mm | 450mm
Total measuring range 155mm | 320mm | 470mm
Resolution 1 µm | 0.00005 IN
Accuracy [µm] 2.5 + L [mm] / 175 [mm]
(with standard probe, at 20 +0.5 °C)
Repeatability (+2s) 2 µm | 0.00008 IN
Measuring sensor max speed 3m/s
Motor max speed 0.05m/s | 0.1m/s
Measuring force (set at works) 0.2 - 0.3 N
Operation time 40 hours
Weight 3.9 kg | 4.6 kg | 6.8 kg
Weight of standard probe 7.5g, possibility of using 0-18g
probe, (0-25g, with measuring
force adjustment)
Data input / output RS232-C | USB
Number of measurements / second
In normal mode 12 meas./s.
In diameter/min/max mode 50 meas./s.
DC power supply 9V DC, 1100mA
Battery 4xAA NiMH 2200 mAh
Operating temperature +10° to +40°C
Storage temperature -20° to +45°C
Thermal expansion coefficient (same value than steel) (11.5+1.5) x10
-6
[1/°C]
Measuring system Sylvac inductive system, patented