4
Operating Instructions
Wi-Fi Methane (CH
4
) Gas Detector
Item no: 2498158
1 Intended use
The product is a standalone methane (CH
4
) gas detector. The product will constantly monitor gas levels
and sound an alarm when combustible gas is detected.
Important:
■
This product will not detect other types of gases, steam, heat, or smoke.
■
This product cannot prevent explosions. It is only a warning indicator signalling a gas leakage.
■
When the end of service light indicator [
Yellow: Service life
] lights up, disconnect the power sup-
ply, remove the product from use, and then replace it with a new one.
■
Standard implemented: EN 50194-1:2009.
The product is designed for private use only.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
2x Screws
■
2x Dowels
■
Mounting bracket
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Symbols in this document
The symbol warns of hazards that can lead to personal injury. Read the information carefully.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
Read the information carefully.
5 Symbols on the product
Protection class 2 (double or reinforced insulation, protective insulation).
Read the operating instructions carefully.
6 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
6.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
6.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
6.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
6.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
6.5 Mains cable
Do not tamper with power supply components. Risk of death by electric shock!
■
Always ensure proper connection.
■
Never use damaged power supply components.
■
Do not modify power supply components.
■
The mains outlet must be located near to the device and be easily accessible.
■
Never plug in or unplug the mains plug when your hands are wet.
■
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains socket
using the intended grips.
■
Unplug the mains plug from the mains socket if you do not use the device for an extended period of
time.
■
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
■
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mech-
anical stress.
■
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
■
Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged mains
cable can cause a deadly electric shock.
■
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker) and then
carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
■
A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned by the
manufacturer or a similarly qualified person, so as to prevent any danger.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of in-
jury.
6.6 Product
Important:
When the end of service light indicator [
Yellow: Service life
] lights up, disconnect the power supply,
remove the product from use, and replace it with a new one.
7 Product overview
1
2
3
4
5
6
7
1
Power cable
2
Alarm speaker
3
Mounting bracket
4
Red: Alarm
/
Green: Power
/
Yellow: Fault
5
Function button
6
Yellow: Service life
7
Gas detection holes
8 Status indicator lights
Mode
Status LED [Red: Alarm /
Green: Power / Yellow:
Fault]
End of life LED [Yel-
low: service life]
Alarm (buzzer)
Start-up
Green flashing
-
-
Testing
Red flashing
-
4x per cycle (8x total)
Normal operation
Green constant ON
-
-
Fault
Yellow constant ON
-
Constant alarm
Alarm
Red flashing
-
4x beeps per cycle
End of life
-
Yellow flashing
3x beeps per cycle
Waiting for Wi-Fi
connection
-
Yellow flashing
-
