5
8 Installation
8.1 Installing
To install the product, clamp it onto the valve or the pipe that is connected to the valve.
B
C
D
E
Open
Closed
A
Illustration 1:
Valve drive installation
A
Lever
B
Valve lever
C
Stopper
D
Valve
E
Pipe clamp
P
RECONDITIONS
:
a
Outer diameter of the lever valve or pipe: min. 12.7 mm (½”), max. 31.75 mm (1¼”)
a
Force required to open the valve (Break-To-Open torque): max. 5.88 Nm
a
Force required to close the valve (End-To-Close torque): max. 5.88 Nm
1. Align the lever
(A)
with the valve lever
(B)
. Pull the ring of the gear release mechanism
and move the lever into the open or closed position (see installation image).
2. Use the pipe clamp
(E)
and install the product on the valve
(D)
or pipe. Because the pipe
clamp absorbs most of the force, make sure to firmly secure it.
3. Adjust the stoppers
(C)
to fine adjust the opening and closing points of the valve.
8.2 Connecting to power
To operate the product, connect it to the mains supply via the power adaptor.
WARNING
Motor runs when connecting to power.
Moving parts can trap and squeeze body parts.
● Keep body parts away when connecting power.
1. Connect the power adapter cable to the power supply cable of the product.
2. Connect the power adapter to suitable mains socket.
à
The motor will start and the valve will open or close depending on the factory settings.
à
The product is ready for operation.
9 Manual operation
Use the On/Off button
on the product to operate the product manually.
1. Push the On/Off button
to open or close the valve.
à
(If the valve is open) the indicator light on the product is on.
Note:
In normal operation, the valve is always in one of two states: fully closed or fully open.
10 App operation
After adding the product to the mobile app and connecting it to the Wi-Fi network, you can
use the app to remotely control the product.
10.1 Installing the mobile app
Install the TUYA mobile app on your mobile device to operate and control the product.
1. Download the mobile app “Smart Life - Smart Living” from the Google App Store or the
Apple App Store.
2. Set up a TUYA account.
10.2 Adding product to mobile app
For mobile app control, you must add the product to the app and connect it to a suitable
Wi-Fi network.
Important:
The product can only be connected to 2.4 GHz Wi-Fi networks.
P
RECONDITIONS
:
a
The TUYA mobile app “Smart Life - Smart Living” is installed on your mobile device.
a
The product is within the range of the Wi-Fi network.
1. On your mobile device, activate Wi-Fi.
2. Connect your mobile device to the Wi-Fi network to which you intend to connect the
product.
3. On the product, hold down the On/Off button
until the motor starts to move.
WARN-
ING! Keep body parts away from moving parts.
à
The indicator light flashes (if the valve is in the open position, the flashing is weak).
4. Open the mobile app.
5. Tap on
+
to add a new product.
6. Tap on
Auto Scan
to find the new product.
7. Wait for the auto scan function to list the product.
8. Follow the on-screen instructions to add the product.
à
You have added the product to the mobile app.
à
You have connected the product to the Wi-Fi network.
10.3 Operating and controlling
Use the mobile app to remotely operate and control the product.
Opening and closing the valve
1. On the screen
Home
, touch the On/Off button
to open and close the valve.
à
(If the valve is open) the On/Off button
is green.
à
(If the valve is open) the indicator light on the product is on.
Note:
In normal operation, the valve is always in one of two states: fully closed or fully open.
Setting the default restart status
The default restart status defines if the valve opens or closes when power is re-established
after a power failure.
1. Open
Setting
.
2. Set the default restart status: close (valve closes), open (valve opens).
3. Confirm the settings.
11 Emergency operation
During a power failure the valve cannot be opened or closed. Release the gear by the gear
release mechanism and open and close the valve manually.
WARNING
Motor runs if gear is released with power supplied.
Moving parts can trap and squeeze body parts.
● Disconnect power before releasing the gear.
1. Disconnect the power supply. In case power is re-established the motor will not run.
2. Pull the ring on the gear release mechanism to release the motor.
3. Open or close the valve manually.
4. Reconnect the power supply.
Important:
When the power supply is re-established, the valve will open or close according to the
Restart status
setting in the mobile app.
12 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
13 Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accord-
ance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
