c) Selecting the access mode
The changeover contact can be activated in three different ways. The access mode can be
changed for this purpose.
Proceed as follows:
•
Enter the master code twice to start the programming mode, as described in section 8. a).
The yellow LED must light up.
•
Enter the programming code for the access mode:
•
The code lock will emit 2 beeps.
•
Select the desired access mode:
= transponder
or
standard access code (the same applies for all users; see programming
in section 8. d)
= only transponder
= transponder
and
respective user code; a separate user code must be saved for each
user
•
The code lock will emit a long beep.
•
Other settings can now be made, if desired. Press the button to exit the programming
mode.
Example for changeover contact activation only via transponder (first start programming mode,
see section 8. a):
53