b) Persons / Product
• This device is not intended to be used by persons (including children) with reduced physical,
sensory or mental abilities or lack of experience and / or lack of knowledge unless they are
supervised by a person responsible for their safety or have received instructions on how to
use the device.
•
Children should be supervised to ensure that they do not play with the device.
•
Children must not clean, service or repair the product unless they are supervised by an adult.
•
Before connecting to the mains, make sure that your local AC mains voltage matches the
specifications on the nameplate.
• Never touch the product with wet or damp hands.
•
The device was constructed according to protection class I. Only a proper mains socket
(220 - 240 V/AC, 50 Hz) of the public supply net must be used as voltage source.
•
Never pour any liquids over electrical devices or put objects filled with liquid right next to the
device. If liquid or an object enters the interior of the device nevertheless, first power down the
respective socket (e.g. switch off circuit breaker) and then pull the mains plug from the mains
socket. Do not operate the product anymore afterwards, but take it to a specialist workshop.
• Do not use the product if it is damaged.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. Allow the product to reach room
temperature before connecting it to the power supply and putting it to use. This may take
several hours.
• The mains outlet must be located near to the device and be easily accessible.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains
socket using the intended grips.
• Never plug in or unplug the mains plug when your hands are wet.
• Unplug the mains plug from the mains socket if you do not use the device for an extended
period of time.
• Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
•
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under
mechanical stress.
• Avoid excessive thermal stress on the mains cable from extreme heat or cold. Do not modify
the mains cable. Otherwise the mains cable may be damaged. A damaged mains cable can
cause a deadly electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
(e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains
socket. Never use the product if the mains cable is damaged.
• A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned
by the manufacturer or a similarly qualified person, so as to prevent any danger.
• This may result in an electrical shock! Do not immerse the fan in water.
• Do not use the fan near an open window to prevent a short circuit due to dripping rainwater.
•
Before removing the protective grille, the fan must be switched off and disconnected from the
mains. To disconnect the fan from the mains, unplug the mains plug.
•
Only use the fan when the protective fan grille is closed and in perfect condition.
• Never cover the product during use.
•
Make sure that no objects (such as textiles) can get caught in the rotor blade. Hair or curtains
may be sucked into the fan!
• Never leave the product unattended during use.
•
Risk of injury! Do not insert any objects or fingers into the protective grille when the fan is on.
• Place the fan on a suitable surface so that it will not vibrate or tip over during use.
• Do not place the fan next to an oven or other sources of heat.
• When you are setting up the fan, ensure that the fan head can move freely from side to side
when it oscillates and that it will not knock over / be obstructed by other objects.
Operating elements
1
2
3
4
5
6
7 8
9
10
11
12
13
14
19
16
17
18
15
1 Front protective grille
2 Fixing screw (protective grille)
3 Rotor blade
4 Locking screw (rotor)
5
Fixing screws
(protective grille/motor unit)
6 Rear protective grille
7 Rotary switch (three settings)
8
Oscillation switch
9 Telescopic stand
10
Height adjusting knob
11
Base
12 Stand weight
13
Profile disc
14
Tommy screw
15 Mains cable with mains plug
16 Tightening wheel
17 Supporting screw
18 Knurled screw
19 Phillips screw
Operating instructions
Stand fan 50 W
Item no. 1430244
Intended use
This fan is designed to circulate air in indoor spaces. It features an oscillating function in order to circulate air
over a wider area. There are three fan speed settings available.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The exclamation mark indicates specific risks associated with handling, function and
use.
The “arrow” symbol indicates special tips and operating information.
The product must only be used and operated in dry, enclosed indoor areas. The product
must not become damp or wet, otherwise there is a risk of a fatal electrical shock!
The fan has undergone an endurance test under tropical conditions with an ambient
temperature of up to 40 °C.
All metal parts that could carry voltage in the event of a fault during operation and
maintenance must be electrically connected to the protective earth conductor.
This symbol reminds you to read the operating instructions included with the product.
Delivery content
• Stand fan
•
Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code above.
Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
•
Consult an expert when in doubt about the operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.