EN
3
1.0 Scope of Supply
HF Inverter e
@
syDrive® TV 4504
Material no. 2.001.9226
(Drive System SFU 0200/2)
SycoTec
–
Short Instruction For Use
Material no. 2.001.9377
HF Inverter e
@
syDrive® TV 4504
BMR
–
CD "Manuals & Software"
Mains cable, length approx. 2 m
15-pole female Submin D connector
2.0 Connections
3.0 Motor
Name
I/O
Meaning
Pin
U
O
Motor phase U
1
V
O
Motor phase V
2
W
O
Motor phase W
3
PE
Protective Conductor
4
PTC
I
PTC-Signal
5
GND
I/O
Ground for PTC
6
4.0 Power Supply
The inverter can be connected to either 230V or 115V networks.
The supply voltage can be adapted to the relevant mains supply at the bottom of the device using a rotary
switch.
In addition, the mains fuse must be replaced accordingly (see table).
Supply voltage
Fuse
115 V
5,0AT
230 V
3,15AT
Switching the mains voltage may only be carried out by qualified personnel!
Incorrect setting will cause serious damage to the frequency converter.