Page | 2
1.
Safety Warning
Please comply with all warnings and operating instructions in this manual strictly. Save
this manual properly and read carefully the following instructions before installing the
unit.
Do not
operate this unit before reading through all safety information and
operating instructions carefully.
1.1.
Transportation
Please transport the UPS system only in the original package to protect against shock
and impact.
1.2.
Preparation
o
Condensation may occur if the UPS system is moved directly from cold to
warm environment.
The UPS system must be absolutely dry before being installed.
PLEASE ALLOW AT LEAST TWO HOURS FOR THE UPS SYSTEM TO ACCLIMATE THE
ENVIRONMENT.
o
Do not
install the UPS system near water or in moist environments.
o
Do not
install the UPS system where it would be exposed to direct sunlight or
near heater.
o
Do not
block ventilation holes in the UPS housing.
1.3.
Installation
o
Do not
connect appliances or devices which would overload the UPS system
(e.g. laser printers) to the UPS output sockets.
o
Place cables in such a way that no one can step on or trip over them.
o
Do not
connect domestic appliances such as hair dryers to UPS output
sockets.
o
The UPS can be operated by any individuals with no previous experience.
o
Connect the UPS system only to an earthed shockproof outlet which must be
easily accessible and close to the UPS system.
o
Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable of
your computer) to connect the UPS system to the building wiring outlet
(shockproof outlet).
Summary of Contents for Online UPS
Page 13: ...Page 11 Battery Kit 2 Units Battery Kit 3 Units...
Page 14: ...Page 12 Battery Kit 6 Units...
Page 27: ......