Sy-G Online UPS, User Manual

Page: 19 / 27

Page | 17
03: Output frequency setting.
INTERFACE SETTING
Parameter 2 & 3: Output frequency setting.
You may set the initial frequency on battery mode:
BAT 50: presents output frequency is 50Hz.
BAT 60: presents output frequency is 60Hz.
If converter mode enable , you may choose the
following output frequency :
CF 50: presents output frequency is 50Hz.
CF 60: presents output frequency is 60Hz.
04: ECO enable/disable.
INTERFACE SETTING
Parameter 3: Enable or disable ECO function. You
may choose the following two options:
ENA: ECO mode enable.
DIS: ECO mode disable (Default).
05 : ECO voltage range setting.
INTERFACE SETTING
Parameter 2 & 3: Set the acceptable high voltage
point and low voltage point for ECO mode.
Press the Down key or Up key.
HLS: High loss voltage in ECO mode.
For 208/220/230/240 VAC models, the setting range
are from +7V to +24V of the nominal voltage (Default:
+12V).
For 110/115/120/127 VAC models, the setting range is
from +3V to +12V of the nominal voltage (Default:
+6V).
LLS: Low loss voltage in ECO mode.
For 208/220/230/240 VAC models, the setting range is
from -7V to -24V of the nominal voltage. (Default: -
12V).
For 110/115/120/127 VAC models, the setting range is
from -3V to -12V of the nominal voltage (Default: -6V).