SXT Gekko 1200, Owner'S Manual

Page: 22 / 80

1. Turn the key to the ‘ON’ position, then turn the Throttle gradually to
accelerate.
2. To prevent losing control of the vehicle, please turn the throttle slowly
until the speed increases.
3. Do not turn the throttle until you are in the position to drive.
4. To stop, release the throttle and apply the front and rear brake
simultaneously. You can decelerate by slightly pressing the brakes to
start regeneration mode.
5. To move, release the brakes and turn the Throttle gradually.
6. When you turn move the turn signal switch left or right and don’t forget
to press it to turn it off.
7. The Brushless motor makes a small electromagnetic noise when turning
the Throttle to start. This is normal.
8. Please, for your safety and security, take the key out when you are
not riding.
TORQUE/GEAR SWITCH
1. Turn the key to the ‘ON’ position, then turn the Throttle gradually to
accelerate.
2. To prevent losing control of the vehicle, please turn the throttle slowly
until the speed increases.
3. Do not turn the throttle until you are in the position to drive.
4. To stop, release the throttle and apply the front and rear brake
simultaneously. You can decelerate by slightly pressing the brakes to
start regeneration mode.
5. To move, release the brakes and turn the Throttle gradually.
20
OPERATING INSTRUCTION SXT-SCOOTERS