SXT Gekko 1200, Owner'S Manual

Page: 12 / 80

CAUTION
DO NOT DROP THE BATTERY.
CAUTION
TO AVOID DAMAGE TO THE BATTERY WHEN
CHARGING, USE ONLY THE CHARGER PROVIDED WITH DEALER.
1. WARNING
DO NOT CHARGE OR STORE THE SCOOTER CLOSER THAN 20 FEET
FROM ANY FLAME (E.G. FURNACE, FIREPLACE, WATER HEATER,
SPACE HEATER)
2. Be sure to only use 110-230V AC with the E-SCOOTER charger. Also
make sure the plug is inserted into a three prong grounded AC outlet.
3. PLUG the POWER INPUT CORD into the E-SCOOTER charging recep-
tacle located below the front of the seat. See picture above.
4. Plug the 60V battery charger into a 110-230V AC power source.
5. The CHARGER INDICATOR LIGHT will illuminate confirming that pow-
er is connected to the charger. If the light does not come on check all
connections. If it still does not come on after checking all connections,
fuses and that your AC plug is working, unplug the charger and call
your local dealer.
6. WARNING
DO NOT KEEP THE SCOOTER CONNECTED TO THE CHARGER FOR
LONGER THAN 18 HOURS UNDER ANY CIRCUMSTANCES! DOING
SO COULD CAUSE THE BATTERY OR CHARGER TO OVERHEAT AND
CAUSE A FIRE.
7. When the light on the 60V charger is “red”, the E-SCOOTER battery
is being properly charged. When the E-SCOOTER battery is fully
charged, the light will turn “green”. If this does not occur after 16 hours
of charging, unplug the charger and call your local dealer. Normal
recharge time for the main battery is 6-8 hours (assuming it is not 100%
discharged).
10
BATTERY SXT-SCOOTERS