300143 RevA
Page 1 of 9
Contents:
Introduction
1
Unpacking and Pre-Installation 1
Installation and Mounting
2
Wiring
Instructions
5
Options and Maintenance
6
Replacement Parts/Accessories 8
Troubleshooting
9
Contact
Details
9
IMPORTANT!
Read all instructions before installing and using. Installer: This manual must be
delivered to the end user. This manual assumes installation by a suitably qualified Automotive
Technician.
Introduction:
SWS 26 Series Lightbars are versatile and powerful warning devices suitable for a range of vehicle types and duties. There are numerous
options and lengths available. The lightbars can either be mounted permanently to the vehicle or mounted using an optional roof mounting
kit.
The 26 Series Lightbar features a durable aluminum chassis, polycarbonate base and domes and has a sleek, low profile, suitable for many
vehicle applications. The Igniter Series supports three different kinds of LED modules: Warning modules, Stop-Tail-Turn modules, and white
Alley/Takedown/Worklight modules.
Unpacking and Pre-Installation:
Carefully remove the lightbar and place it on a flat surface. Examine the unit for transit damage and locate all parts. If damage is found or
parts are missing, contact SWS. Do not use damaged or broken parts.
Ensure the lightbar voltage is compatible with the planned installation.
*Optional Controller
Installation and Operating Instructions
26 Series Igniter Lightbars
