SWP Stealth-XG 6044, Operator'S Manual

Page: 26 / 32

SENSITIVITY CONTROL
The responsive ness to different light levels in various welding processes can be adjusted
between low and high by rotate the SENSIVITY button on ADF(Position 3)
.
Clockwise rotate the button on the ADF, Sensitivity will be increased; Or Anticlockwise
rotate the button on the ADF, Sensitivity will be reduced.
Turn to low : The photo sensitivity changes to be lower.
- Suitable for high amperage welding and welding in bright light conditions (lamp light
or sun light).
Turn to high : The photo sensitivity changes to be higher.
- Suitable for low amperage welding and using in poor light conditions.
- Suitable for using with steady arc process such as TIG welding.
- Under normally use, a higher sensitivity setting is recommended.
DELAY CONTROL
The length of time delay for the ADF returns to light state after welding can be adjusted in the
range 0.1~0.9s.The time delay is for protection of welder’s eyes from strong residual rays after
welding.Delay time can be adjusted by rotate the DELAY button on ADF(Position 4)
.
Clockwise rotate the button on the ADF, Delay time will be increased; Or anticlockwise
rotate the button on the ADF, Delay time will be reduced.
Turn to
min(0.1s)
: Thetime the ADF lighten after welding to be shorter. The shortest
time is about 0.1s depending upon welding point temperature and shade set. This
setting is ideal for track welding or production welding with short welds.
Turn to max(0.9s) : The time the ADF lighten after welding to be longer.The longest
time is about 0.9s depending upon welding point temperature and shade set. This
setting is ideal for welding at high amperage where there is an after-glow from the weld.
Grinding and Welding SELECTION
Select grinding mode and Welding mode by switching the button on the ADF,(Position 5)
The red light on ADF will flash at Grinding mode (Position 7) .
Note: Do not weld in the grinding mode, the ADF will not darken.
BATTERY INDICATOR
T he light on ADF become red (Position 6) , Change the battery of ADF. Otherwise ,
switching time will become slower and shade accuracy will be compromised.
26