Operating the Walkie−Talkies
60
Scanning for a channel
If an active channel is detected, the channel scan stops.
Press the
P
button to enable radio communication on this channel.
If you do not press the
P
button, channel scanning is resumed five
seconds after no further signal has been transmitted on this channel.
Press the
/
button to skip this channel.
Start/End channel search
5x
M
/
Start channel scanning
The scanning routine stops at every channel on which a signal is received regardless
of the CTCSS/DCS code transmitted with the signal.
6x
M
/
Start channel scanning with CTCSS
The search process stops when a signal with a CTCSS code is transmitted on the set
channel.
7x
M
/
Start channel scanning with DCS
The search process stops when a signal with a DCS code is transmitted on the set
channel.
P
End the channel search
Transmitting the ringing tone
The ringing tones indicate to other subscribers that you want to talk to them. A condi-
tion for this is that the other subscribers are using the same channel and CTCSS/
DCS code.
C
Send the ringing tone
Selecting/Deactivating ringing tones
There are 10 ringing tones available for selection.
8 x
M
Activate the programming mode
/
,
P
Select the ringing tone and confirm it
Summary of Contents for WTF732
Page 67: ...Notes 67 Notes ...
