Operating the Walkie−Talkies
59
3 x
M
Activate the DCS code programming mode
/
P
Select the DCS code and confirm it
An exception here is CTCSS/DCS code 0 (zero). When this setting is set, all
calls made on the channel set can be heard. In order to participate in the ra-
dio communication, you must set the corresponding CTCSS/DCS code.
Monitor function
The Monitor function enables the search for weak signals on the channel currently
set. If you receive an external signal, switch to a free channel. Always communicate
with other subscribers on a free channel to prevent interference.
a
M
and
Monitor the channel
M
End monitoring
VOX
1
(handsfree)
With this function, the walkie−talkie begins to transmit automatically on detecting a
voice or a sound without the
P
button being pressed.
When you start to speak, there is a slight delay before the walkie−talkie starts
to transmit.
Activating VOX mode
4 x
M
Select VOX mode
Open the VOX settings
/
Select the sensitivity
P
Confirm the selection
There are three sensitivity levels available for operation in VOX mode and can be se-
lected according to the ambient noise.
1
2
3
OF
Loud ambient
noise
Normal ambient
noise
Low ambient
noise
VOX
deactivated
1
VOX: V
oice
O
perated
T
ransmission = Activation on detecting a sound
Summary of Contents for WTF732
Page 67: ...Notes 67 Notes ...
