29
30
Operating the Walkie−Talkies
63
4
Operating the Walkie−Talkies
Display and notation of operating sequences
P
Press the button depicted
a
,
P
Press and hold the button
displayed
b
,
P
Release the button displayed
[
y
]
Display indicator
ð
Speak into the microphone
Switching the walkie−talkies on/off
The main switch is located on the underside of each walkie−
talkie. Set the switch to ON before switching the walkie−talkie on.
aV
Switch the walkie−talkie on
A beep tone is heard. The channel and code used last
time will display and the Ready LED flashes.
a
V
Switch the walkie−talkie off
If the walkie−talkie is to remain unused for a longer
period, we recommend you set the main switch to OFF.
If set the switch to OFF for a long time, the channel and
code will return to its default setting.
Volume control
X
/
Y
Raise or lower the volume
(16 levels)
Transmitting and receiving
Transmitting
After pressing the
P
button, the Transmit LED lights up.
If the
P
button is pressed longer than 60 seconds, a warning
signal is issued. Transmission is interrupted.
a
,
P
,
ð
Transmit
Hold the walkie−talkie approx. 5 to 7 cm from your
mouth and speak at a normal volume. In order to talk to
other subscribers, the respective walkie−talkies must
be set to the same channel and CTCSS/CDCSS codes.
