- Operation -
55
3.11 Channel search (scan mode)
When channel search (scan) is switched on, all 8 channels are
continuously polled until the radio finds a channel that is being used
for speech.
1. Press
the
MODE
button three times. The
indicator will flash
in the display.
2.
Channel search is switched on with the
button and switched
off with the
button.
3.
Confirm the selection with the
PTT
button on the left-hand side.
4.
All channels will now be scanned one after the other. As soon as
a channel is found that is currently in use, channel search will be
interrupted for 2 seconds. Press the PTT button during this time if
you want to keep the channel that has been found and exit the
channel search. Channel search can be switched off at any time
with the
MODE
button.
3.12 Selecting a call tone
You can transmit a call tone to the other radios using the
CALL
START
button (see 3.5) when you want to begin a call. 10 different
melodies are available.
1. Press
the
MODE
button four times. The
CA TONE
indicator will
flash in the display.
2.
Select the required call tone between 1 and 10 using the
and
buttons.
3.
Confirm the selection with the
PTT
button on the left-hand side.
