- Operation -
52
This will indicate to the other subscriber that you have finished
speaking and are waiting for a reply.
The volume of the incoming call signal depends on your volume
setting. 16 volume levels can be set using the
and
buttons.
Note:
While you are holding the
PTT
button, you will not be
able to hear any incoming calls. As is usual with radio units,
only one of the two participants in the call can speak at any
one time.
Therefore, always wait until you hear the signal tone before pressing
the
PTT
button again.
While you are pressing the
PTT
button, the
symbol will appear in
the display. When you receive a call, the
symbol will appear in the
display.
3.6 Switching on VOX mode
In VOX mode, the radio will automatically start to transmit as soon as
your voice or another noise is detected. It is not necessary to press
the
PTT
button. Transmission will always take place for 2 seconds,
even when you speak for less than 2 seconds.
Three sensitivity levels from 1 to 3 can be set for VOX mode. With
setting 1, even softer noises will be transmitted whereas, with setting
3, only loud signals will be sent. In setting 0, VOX mode is switched off
(standard setting).
