Special Functions
110
10 Special Functions
Dialling mode
The telephone can be operated in analogue exchanges (PULSE) as well
as new, digital exchanges (TONE/DTMF). The dialling mode is controlled
via the menu. Refer to Page 107 for the sequence of menu option selec-
tions.
Temporary tone dialling
If you only operate the telephone using the PULSE dialling mode, you can
still make use of the advantages of the TONE dialling mode (e.g.: remote
access of the answering machine in the telephone network). You can
temporarily switch to Tone dialling when a connection has already been
made.
2 sec.
Press when a connection has been
established
When the call is ended, the equipment automatically switches back to
Pulse dialling.
Alarm
The Alarm clock" function can be used so that you are alerted by the
handset at a specific time. Refer to Page 108 for the sequence of menu
option selections.
Direct calls
This function enables you to store a number which is automatically dialled
after any button is pressed (except the Option softkey). Refer to
Page 107 for the sequence of menu option selections.
Speed dial
There must be phone numbers stored as speed dial numbers. Refer to
Page 108 for the sequence of menu option selections.
2 sec.
)
to
-
Press the required speed dial button
The phone number assigned is automatically dialled.
Copying phone book entries
Phone book entries can be copied from one handset to another.
Copying single entries
Open the phone book
/
Select the required entry
Option
Select the option
/
, OK
Select Copy" and confirm it
/
, OK
Select the handset and confirm it
Yes / No
Select accordingly on the receiving
handset
Copying all entries
Open the phone book
Option
Select the option
/
, OK
Select Copy all" and confirm it
/
, OK
Select the handset and confirm it
Yes / No
Select accordingly on the receiving
handset
