66
Putting the Telephone into Operation
92
Connecting the charging station
1
Connect the charging station as
illustrated in the diagram.
For safety reasons, only use the
power adapter plug supplied.
Inserting the batteries
Insert the batteries in the open battery compart-
ment. Only use batteries of the type AAA Ni−MH
1.2V. Pay attention to correct polarity. Close the
battery compartment cover.
Charging the batteries
Before the handset is used for the first time, insert it in the base station / charging station for
at least
15 hours.
When the handset is inserted in the base / charging station properly, you will hear a confirmation signal and
the charge control lamp lights up. The handset warms up during the charging process. This is normal and
does not represent a risk. Do not charge the handset with charging units from other manufacturers.
The current
battery charge status
is indicated in the display:
Full
Half empty
Low
Empty
Private branch exchanges
The information on Page 105 explains how to install your telephone in a private branch exchange.
Setting the weekday and time on the answering machine
The information on Page 99 explains how to set the weekday and time on the answering machine.
1
Only applies to telephone sets with at least two handsets
Checking the package contents" on Page 91.
Mains power outlet
Summary of Contents for DET177 series
Page 117: ...Index 117 ...
