6
Registering a handset
☞
Five handsets can be registered to a base station. The handsets deli-
vered with your telephone are already registered. To register a “foreign“
handset please refer to it’s user manual.
… press, select
REGISTER
using
¦
/
and press
.
¦
/
Select a base station to subscribe to and press
.
Enter the base’s PIN (DET 367x base station in delivery state “0 0 0 0“) .
Press and hold the paging key at the basestation for approx. 10 s. The
LED
will begin to flash. After this the base station will be in regis-
tration mode for one minute.
Deleting a handset
☞
You can delete a handset from a base to allow another handset to be
registered. Note: you can only remove other handset in your system but
you are not able to remove the handset you are using.
… press, select
DE-REGISTER
using
¦
/
and press
.
… press and hold
for approx. 3 seconds.
Enter the PIN for the base station (DET 367x base station „0 0 0 0“).
Enter the internal telephone number (1…5) of the handset you want to
remove.
7 Answering Machine
The integrated digital answering machine offers a total recording time of up to
11 minutes for outgoing and incoming messages
Self recorded memos are treated like messages.
You can operate the answering machine at the base station. An internal voice
will give you advices. You can switch the language from german to french.
Using a telephone with tone dialling (DTMF) you have also a PIN protected
remote access.
You can select between two modes:
- Answer and record
- Answer only.
A standard announcement is already saved for every operating type at the
delivery stage. Therefore the answering machine is immediately operational.
At “Answer and record” and reaching of the maximum recording capacity the
device will automatically switch to the operating type “Answer only”.
OK
OK
OK
OK
OK
Resetting the handset (delivery state)
☞
The handset will be resetted to the delivery state - the entries in the
phonebook, the caller list and the redial list will be deleted.
… press, select
HANDSET
using
¦
/
and press
.
¦
/
Select
RESET
and press
.
Confirm the safety request by pressing
and enter the PIN (0 0 0 0 in
delivery state).
Dialling mode (Tone / Pulse)
☞
You can switch the dial mode. In most situations the TONE option
should be selected.
… press, select
BASE
using
¦
/
and press
.
¦
/
Select
DIAL MODE
and press
.
¦
/
Select
TONE
or
PULSE
and press
.
or
… press and hold for approx. 3 s.
T
(Tone) or
P
(Pulse) appears in the
display.
Flash time
☞
You can set the flash time to 100 ms (usually for special services of
your telephone provider/delivery state) or 300 ms (e. g. for a telephone
exchange). In case of questions please contact your telephone provider or
the system administator of your PBX.
… press, select
BASE
using
¦
/
and press
.
¦
/
Select
RECALL
and press
.
¦
/
Select
SHORT
or
LONG
and press
.
or
… press and hold for approx. 3 s.
S
(100 ms) or
L
(300 ms) appears in
the display.
System PIN
☞
In delivery state the PIN is set to “0 0 0 0“.
The PIN is valid for all registered handsets.
… press, select
BASE
using
¦
/
and press
.
¦
/
Select
SYSTEM PIN
and press
.
Enter the old PIN and confirm by pressing
.
Enter the new PIN twice and confirm each by pressing
.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
DET367x_GB_Version2 04.06.2009 13:55 Uhr Seite 6
