switel DC68x, Operating Instructions Manual

Page: 109 / 116

In Case of Problems
109
Problems and solutions
Problems Solutions
No telephone calls possible − The telephone is not connected properly or is
defective. Only use the telephone connection
cable supplied.
− Test whether the telephone connection is in
order by using another telephone.
− The power adaptor plug is not plugged in or
there is a complete power failure.
− The rechargeable batteries are empty or de-
fective.
− The handset is too far from the base station.
− The wrong dialling mode is set; Page 99.
No connection to base station
possible − Check that the handset has been registered on
the base station with the correct PIN code;
Page 99.
Connection is disturbed or cut off − The handset is too far from the base station.
− The base station is in an unsuitable location.
The system no longer responds − Reset all the functions to their default settings;
Page 99.
− Disconnect the power adapter plug briefly from
the power socket.
The batteries are empty within a
short time − The batteries are empty or defective.
− Place the handset in the base station properly.
Clean the contact surfaces on the handset and
base station with a soft, dry cloth.
− Place the handset in the base station for
16 hours.
The caller number display (CLIP)
does not function − The caller number display (CLIP) is a supple-
mentary service offered by your telephone net-
work provider. Contact your network provider
for further information.
− The caller has suppressed the transmission of
their phone number.