WatchDog Timer Enable
The last thing to do before installing your SolarMAX2 system is to make sure the WatchDog Timer has been
enabled on the MiniProPlus Board (Part H). Locate the Watchdog Timer Enable (upper left in the picture
below) switch and turn it towards the left of the MiniProPlus board. Now it is enabled. If your SolarMAX2
MiniProPlus hangs, then it will be rebooted by the WatchDog Timer after 60 seconds. Makes your system
much more reliable!
Here’s an article about watchdog timers:
https://www.switchdoc.com/2017/08/reliable-projects-1-watchdog-timers-raspberry-pi-arduinos/
Installing Your SolarMAX2 System
Plug your solar panel into the appropriate MC4 plugs on the outside of your box and your SolarMAX2 system
is complete.
Page
34
Version 1.1 September 2021
Summary of Contents for SolarMAX2
