The following elements can be configured by the administrator :
■
DHCP use
■
Telephone IP address and subnet mask
■
DNS server
■
Gateway IP address
■
VLAN
■
TOS
■
Call agent IP address and port number
■
Tone table
■
Password
Each parameter can be configured locally or through the web server. With the latter, when there is
no DHCP server, the telephone’s and the gateway’s IP address must first be configured locally on
the telephone.
This chapter is intended for administration use only. As a user,
you should not have to configure the following parameters.
Press the MENU key repeatedly until "Admin settings" appears.
Press the i key repeatedly to check the current admin
parameters. If one or several parameters in the display are not
correct, press OK under "Change".
Enter the correct password (by default: 0000). Validate with OK.
To modify the following parameters, press the MENU key
repeatedly until you find it.
Note: To enforce the changes in this chapter, you must press on
the END key. If one of the parameters has been modified, the
following display will appear: "Reboot in progress". After the
telephone boots, the LED blinks three times while connecting to
the call agent.
28
02C110500C - web
Admin settings
OK
+
-
OK
+
-
Change
<repeat>
MENU
END
<repeat>
MENU
i
