18
02C110500C - web
Using the extended-feature functions
Transferring the call
After initiating an enquiry call, you wish to connect the two call
partners.
Replace the receiver. The connection is done.
Conference
After initiating an enquiry call, you wish to set up a conference
including your original call partner.
Press the MENU key.
Press OK under "Conference".
Note: Be assured that none of your partners will be
disconnected while your are setting up a conference call. The
connections will only be disconnected if the "END" key is
pressed or if the receiver is replaced.
Holding a call
You can put a call on hold during a conversation.
Press the MENU key.
Press OK under "Hold" and the call is on Hold. This is confirmed
by the message "Executed".
To take a call back, press the OK under "Take back". You are
immediately connected to the first call again.
To initiate a second call while the first one is on hold, press the
MENU key and then OK under "Enquiry call".
OK
+
-
Conference
MENU
OK
+
-
Hold
OK
+
-
Take back
OK
+
-
Enquiry call
MENU
MENU
