Swissvoice Eurit 748, User Manual, Page: 46 / 80

44
20404916en_ba_b0
Network functions
Please note that the services in this chapter are supplementary network services and thus
subject to availability from your network operator.
To activate certain network functions, you have to send special codes to the network.
Often these codes contain special characters such as or . In some cases,
the so-called flash signal is required. You can enter this by pressing key .
Contact your network operator for details and the appropriate codes to activate these
services.
Procedure:
1. Press the softkey under MENU . Press to scroll to NET FUNCTIONS and press OK
to confirm.
2. Scroll to the relevant submenu and make the relevant settings:
Call forwarding
Call forwarding allows callers to reach you even if you are not near your own telephone.
Choose the relevant type of call forwarding (unconditional, no reply, busy) in the submenu
SWITCH ON or SWITCH OFF and enter the forwarding number (i.e. the number to which
calls are to be forwarded).
Unconditional Incoming calls are forwarded immediately.
No reply Incoming calls are forwarded after a delay (fixed time or number of rings).
Busy Calls are forwarded if the line is busy.
Once you have defined the call forwarding option, enter the forwarding number (i.e. the
number to which calls are to be forwarded).
At any time you can: • check the call forwarding status
• edit or delete the forwarding number
• deactivate call forwarding.
R