Swissvoice Eurit 748, User Manual, Page: 18 / 80

16
20404916en_ba_b0
Setting up the telephone
Charging the batteries
The batteries are not yet charged when you first unpack the telephone. Insert the hand-
set in the base station or charging unit for charging. The flashing battery symbol on the
handset shows the charging status. The batteries will take around 14 hours to fully charge.
Note • Do not insert the handset in the base station or charging unit without
batteries.
• Do not use any other type of charging unit since this may damage the
batteries.
The following symbols indicate the charging status on the handset display:
Charging status “full”
Charging status “1/2”
Charging status “empty”
Once the new batteries have been inserted, the display on the handset indicates the
actual charging status only after a complete charging cycle.
Your telephone is now ready to use.
Important!
Please note: after you have inserted the batteries for the first time, the battery display
will indicate the correct information on the charging status only after a complete charg-
ing cycle.
Use only the supplied rechargeable batteries NiMH AAA 800 mAh Model
No. GP80AAAHC. Never use disposable batteries/primary cells.