28
2040
775
5e
n_
ba
_b
0
Telephoning
Internal enquiry call
You are conducting an external call and want to call an internal party
without ending the external call.
1.
Press
Int
.
2.
Dial the desired handset number and press
OK
to confirm. The external
call is put on hold.
If the second handset answers, you can talk to the internal call partner
without the external caller hearing you.
You can switch between the two call parties or connect all three calls into a
3-partyconference. Refer to chapter “Brokering” and “Conference calls”
for more details.
Note
You cannot use the
Int
key if the call duration is not
displayed.
If the second handset does not answer, you can end the
ringing signal and return to the original call by pressing the
softkey under
END
.
Internal enquiries are managed by the base station and are
not dependent on your network operator's available services.
Brokering (switching between two calls)
You have two active calls (1 internal and 1 external), one of which is on hold.
1.
Press the key
Int
or the softkey under
OPTIONS
,
BROKERING
to switch
between the call partners. Press the softkey under
OPTIONS
,
CONFERENCE
to connect all three call partners with each other.
2.
Press
to end one of the calls. The remaining call partners are
automatically connected with each other.
Note
Brokering between two external call partners is managed by the
public telephone network and is therefore dependent on your
network operator's available services (network functions). Find
out whether these network functions are supported.