14
2040
775
5e
n_
ba
_b
0
Setting up the telephone
Setting up the handsets
Your handsets will be ready for operation (for making or accepting calls)
only once the batteries have been fully charged for the first time.
Inserting the rechargeable batteries
The bottom part of the handset contains a battery compartment for
housing two type AAA batteries (microcells).
Removing the
battery compartment
cover:
Slide the battery
compartment cover
downwards
(approx.3 mm) and lift.
Inserting the two rechargeable batteries (note the polarity!):
Insert the batteries in the battery compartment. Make sure the polarity is
correct. Insert the batteries so that the flat end (negative polarity) of the
battery is pressing against the spring. The handset will not function if the
batteries are incorrectly inserted. This may result in damage. Replace the
compartment cover by placing it approximately 3 mm offset and slide it
upwards until it clicks into place.