13
2040
775
5e
n_
ba
_b
0
Setting up the telephone
Connecting the phone
Before you can start using your telephone you must plug in the telephone
connector cable and the mains cable.
Note
The cables must pass above the stand to assure the proper
standing of the base station.
Socket for telephone
connector cable
Socket for mains cable
Safety note
Use only mains adapters 6V
600mA S004LV0600060 for
the base station or charging unit! (supplied).
Telephone connector cable
The telephone connector cable has two different plugs. Insert the smaller
plug in the socket marked with the telephone symbol on the base station,
and fit the cable into the corresponding cable duct. Insert the larger plug in
your telephone connection socket.
Mains cable
First, insert the mains cable in the socket marked with the mains connector
symbol on the base of the base station or charging unit, and fit the cable in
the moulded cable duct. Then insert the mains plug in the 230 V socket.
Note
Your telephone will not function if the mains connector is not
plugged in or during a power failure.