18
2040
775
2en_ba_a0
Telephoning
2.
Press the softkey under
Single
to end the conference and return to
brokering.
3.
Press
to end one of the calls. The remaining call partners are
automatically connected with each other.
Note
Brokering between two external call partners is managed by
the public telephone network and is therefore dependent on
your network operator's available services.
Call transfer to another handset
You can transfer the call you are conducting to another handset.
1.
Press
Int
and dial the handset to which you wish to transfer the call. The
external caller is put on hold.
2.
If the second handset answers, you can talk to the internal call partner
without the external caller hearing you. Press
to transfer the call.
Note
If the second handset does not answer, you can end the ringing
signal and return to the original call by pressing
key .
External enquiry call
You are conducting an external call and want to call another external party
without ending the active external call.
1.
Start the external enquiry call by pressing the enquiry key .
2.
Enter the external call number and press
OK
to confirm.
Note
An external enquiry call is managed by the public telephone
network and is therefore dependent on your network
operator's available services (network functions). Contact your
network operator to find out whether this service is
supported.
