17
2040
775
2en_ba_a0
Telephoning
Internal calls
You can call other handsets which are registered with your base station.
This allows you to make internal calls free of charge.
1.
Press
Int
, dial the relevant handset number and press
OK
to confirm.
Pressing
Int
automatically dials the second handset if only two handsets
are registered with the base station.
2.
Press
OK
to end the call
Internal enquiry call
You are conducting an external call and want to call an internal party
without ending the external call.
1.
Press
Int
.
2.
Dial the desired handset number and press
OK
to confirm. The external
call is put on hold.
If the second handset answers, you can talk to the internal call partner
without the external caller hearing you.
You can switch between the two call parties or connect all three calls into a
3-party conference.
Refer to chapter "Brokering and Conference" for more details.
Note
If the second handset does not answer, you can end the
ringing signal and return to the original call by pressing the
softkey under
Back
.
Internal enquiries are managed by the base station and are
not dependent on your network operator's available
services.
Brokering and Conference
You have two active calls (1 internal and 1 external), one of which is on hold.
1.
Press the softkey under
Brok
to switch between the call partners. Press
the softkey under
Conf
to connect all three call partners with each other.
