background image

21

16. 

Safety instructions

Areas with explosion risk

Always turn off the unit when you are in an area where there is a risk of 

explosion. Follow all signs and instructions. There is a risk of explosion in places 

that include areas where you are normally requested to turn off your car engine. 

In these areas, sparks can cause explosion or fire which can lead to personal 

injury or even death.
Turn off the unit at filling stations, and any other place that has fuel pumps and 

auto repair facilities.
Follow the restrictions that apply to the use of radio equipment near places 

where fuel is stored and sold, chemical factories and places where blasting is 

in progress. Areas with risk for explosion are often – but not always – clearly 

marked. This also applies to below decks on ships; the transport or storage of 

chemicals; vehicles that use liquid fuel (such as propane or butane); areas where 

the air contains chemicals or particles, such as grain, dust or metal powder.

Li-ion battery

This product contains a Li-ion battery. There is a risk of fire and burns if the 

battery pack is handled improperly.

 WARNING

Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or 

burns, do not disassemble, crush, puncture, short external contacts, expose 

to temperature above 60° C (140° F), or dispose of in fire or water. Recycle or 

dispose of used batteries according to the local regulations or reference guide 

supplied with your product.

When you fly

It is prohibited to use the unit in flight. Turn off the unit before you board a 

plane. Using wireless Bluetooth units inside a plane can pose risks to air safety 

and interfere with telecommunications. It may also be illegal.

Clean the unit

• 

Clean the surface with a soft, dry cloth.

• 

Do not use any sprays near the unit. Do not use any solvents, chemicals, or cleaning 

solutions containing alcohol, ammonia or abrasives.

• 

Do not allow liquids to spill into any openings.

Summary of Contents for SW 660 ECG

























Reviews: