Swisson XMT-120A, User Manual

Page: 12 / 25

13.3 LOAD SCENE
In send DMX mode:
•
Press [OK] to access the send options.
•
Choose LOAD SCENE with [UP] and [DOWN] buttons.
•
Press [OK] to access the list of scenes.
•
Choose the scene with [UP] and [DOWN] buttons.
•
Press [OK] to confirm.
•
Press [CANCEL] twice to exit the send options.
All 512 channels of the scene are loaded.
13.4 SHOW LEVEL AS
In send DMX mode:
•
Press [OK] to access the send options.
•
Choose the SHOW LEVEL AS item with the [UP] or with the [DOWN] button.
•
Press [OK] to change the level display format.
•
Press [Cancel] to exit the send options.
The levels can be displayed in percents, in decimal or in hexadecimal.
13.5 EDIT MODE
In send DMX mode:
•
Press [OK] to access the send options.
•
Choose the EDIT MODE item with the [UP] / [DOWN] buttons.
•
Press [OK] to change the edit mode. The edit mode can be NORMAL or DIRECT.
•
Press [Cancel] to exit the send options.
Note: The edit mode setting does not affect groups of channels.
Normal Mode
In normal mode, the level of the current channel may be edited using the keypad. The adjusted level stays stored at
when the current channel is changed using the [CH+] and the [CH-] keys.
Direct Mode
When changing the address in direct mode, the level of the previous address is cleared and the currently set level is
assigned to the new address automatically.
To keep the level of an address when changing the current channel, it's possible to store its level using the [CANCEL]
key. When the level of the current channel has been stored to a value that will stay when changing to another channel,
“STORED” will be shown on the display.
12 PRELIMINARY