7
4.
Place fertilizer or seed in the hopper.
5.
When starting the machine, the bottom of the blades should be 70cm from the ground for an even distribution, and the tractor RPM should be
at 540.
6.
Select the working speed and adjust the hatch openings as specified in the table according to the
amount of product you wish to spread per hectare. (The products whose spreading information is not presented in the tables rely on your
knowledge and experience.)
7.
When you begin spreading, always move the tractor at an even speed to ensure an even distribution.
8.
Remember that when you go faster, less product is spread per hectare, and vice versa.
9.
Engage the PTO at a low rpm and gradually increase the tractor engine rpm to 540.
MIXTURE OF THOMAS PHOSPHA
TE POWDER
AND POT
ASSIUM
THOMAS PHOSPHA
TE
POWDERS
AMMONIUM
SULF
ATE CR
YST
ALS
CALCIUM CYNAMIDE PELLETS
AMMONIUM
NITRA
TE
GRANULA
TED
SUPER POT
ASSIUM
HUMA
TE
FERTILIZER TYPE
WORKING
WIDTH
RPM SPEED
ORIENT
ATION
POSITION
SPREAD DENSITY
PER HECT
ARE
Position of the exit hatch control levers
Vertical metal sheet reference number
GRANULAR
PHOSPHOROUS-POT
ASSIUM
BINAR
Y FERILIZERS
(15-20 or 16-20 types)
GRANULAR COMPLETE
FERTILIZER
(with phosphorus, nitrogen,
and potassium)
UREA
Kg/hectareKg/hectare
Kg/hectareKg/hectare
Kg/hectareKg/hectare
Kg/hectareKg/hectare
Kg/hectare
FEED
RATE
SPREAD TABLE FOR
AMAZONA 600 FERILIZER SPREADERS
ALL
DA
TA
IS INFORMA
TIVE PURPOSES ONL
Y. SWISSMEX
ASSUMES NO LIABILITY
FOR THE USE OF THIS INFORMA
TION.
