Swisscom Top M48, User Manual

Page: 25 / 27

ó
Use the or keys to select the duration you require.
ó
Press MENU / ENTER to confirm your selection.
ó
The device will go back to the previous menu.
ó
Press EXIT to exit programming mode and apply the new settings.
ó
The symbol will appear on the display to indicate that the answering
machine has been switched on.
6.1.4 Programming the outgoing message (OGM option)
ó
You can select either combined answering machine/recorder (OGM1)
or answering machine only (OGM2) mode.
ó
Use the or keys to select the mode you require.
ó
Press MENU / ENTER to confirm your selection.
ó
The device will go back to the previous menu.
ó
Press EXIT to exit programming mode and apply the new settings.
ó
The symbol will appear on the display to indicate that the answering
machine has been switched on.
6.1.5 Delete all messages
ó
You can delete all messages recorded on your answering machine.
ó
Use the or keys to select this function.
ó
Press MENU / ENTER to confirm your selection.
ó
The device will display “Delete all data?”.
ó
Press MENU / ENTER to confirm your selection.
ó
All messages will be deleted and the device will go back to the previous menu.
ó
Press EXIT to exit programming mode and apply the new settings.
ó
The symbol will appear on the display to indicate that the answering
machine has been switched on.
47
ó
Use the or keys to select the parameter or function you require.
ó
Press MENU / ENTER to access the function you require
or
ó
Press EXIT to exit programming mode and save the current settings.
ó
The symbol will appear on the display to indicate that the answering
machine has been switched on.
6.1.1 Programming the number of rings
ó
You can set the number of rings before a call is answered to 2, 4 or 6.
ó
Use the or keys to select the number you require.
ó
Press MENU / ENTER to confirm your selection.
ó
The device will go back to the previous menu.
ó
Press EXIT to exit programming mode and apply the new settings.
ó
The symbol will appear on the display to indicate that the answering
machine has been switched on.
6.1.2 Programming the remote access code
ó
The remote access code is 0000. In order to be able to control your
answering machine remotely, you MUST change the access code.
ó
Use keys 0 to 9 to enter the new code.
ó
Press MENU / ENTER .
ó
Use keys 0 to 9 to enter the new code again.
ó
Press MENU / ENTER to confirm your selection.
ó
The device will display “Change successful!” and go back to the previous
menu after approximately 2 seconds.
ó
Press EXIT to exit programming mode and apply the new settings.
ó
The symbol will appear on the display to indicate that the answering
machine has been switched on.
6.1.3 Programming the recording time
ó
You can choose between HIGH (maximum duration 20 minutes, 162 s per
message) and LOW (maximum duration 50 minutes, 433 s per message)
recording quality.
46