8
Preparing to use your phone
Gigaset CX100-150isdn / englisch / A31008-X150-G101-1-7619 / starting.fm / 20.01.2004
Registering the handset and charging the batteries
When you place the handset into the base, it will register
automatically
to the base.
Proceed step by step as follows:
1. Place the
deactivated
handset in the base with the
display facing upwards
.
2. Wait till the handset has registered automatically to the base (page 41). This
operation takes
around one minute
. You will now see "Time not activated" in the
display. The internal number 11 is assigned to the handset (the first valid internal
number for handsets) and the internal name
Int.11
appears in the display. You can
change the handset name (page 32).
Should automatic registration be interrupted, you must register the handset
manually as described starting on page 41. You can get help from a table containing
basic questions and answers (page 52).
Now leave the handset in the base for the batteries to charge – the batteries are supplied
uncharged. Battery charging is indicated in the top right of the display by the flashing
battery icon
V
:
Note
Your telephone is now ready for use. To correctly record the time of calls you must now
set the date and time. Depending on the network operator, the date and time will be set
automatically by the phone network when you make your first outgoing call.
Activating/deactivating the handset
To activate the handset, press the end call key
a
and hold. You will hear a confirmation
tone (rising tone sequence).
To deactivate the handset, press the end call key
a
again in the idle status and
hold
(confirmation tone).
=
Batteries
(almost)
empty
V
Batteries
2
/
3
charged
e
Batteries
1
/
3
charged
U
Batt. fully charged
i
To register
additional handsets
, refer to page 41.
i
The deactivated handset activates automatically when placed in the base
or charger.
