31
Appendix
Aton CL700 IP / Swisscom EN / A31008-M1713-F161-1-2X43 / appendix.fm / 27.9.06
Ve
rs
ion 4,
16
.09.
2005
Specifications
Recommended batteries
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u
Sanyo Twicell 650
u
Sanyo Twicell 700
u
Panasonic 700 mAh "for DECT"
u
GP 700mAh
u
Yuasa Technology AAA Phone 700
u
VARTA Phone Power AAA 700mAh
u
GP 850mAh
u
Sanyo NiMH 800
u
Yuasa Technology AAA 800
The handset is supplied with two recom-
mended batteries.
Handset operating times/charging
times
The following information relates to bat-
teries with a capacity of 650 mAh.
The operating and charging times apply
only when using the recommended bat-
teries.
Base station power consumption
Depending on current status, around
2.5 W.
General specifications
Standby time
approx. 170 hours (7 days)
Talktime
appox. 13 hours
Charging time
approx. 6 hours
Note:
When the display backlight is turned on, the
standby time of the handset is reduced to
approx. 30 hours.
Interfaces
Fixed network, Ethernet
No. of channels
60 duplex channels
Radio frequency
range
1880–1900 MHz
Duplex method
Time multiplex,
10 ms frame length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission
power
10 mW, average power per
channel
Range
up to 250 m outdoors,
up to 40 m indoors
Base station
power supply
230 V ~/50 Hz
Environmental
conditions in oper-
ation
+5 °C to +45 °C;
20% to 75% humidity
Dialling mode
DTMF (touch tone dial-
ling)/DP (dial pulsing)
Flashing time
250 ms
Codecs
G711, G726, G729AB with
VAD/CNG
Quality of Service TOS, DiffServ
Protocols
DECT, GAP, SIP, RTP, DHCP,
NAT Traversal (STUN),
HTTP
