Swisscom Aton CL700 IP User Giude Download

Page: 46 / 106

SMS (text messages)

Aton CL700 IP LBA / Swisscom EN internet / A31008-M1713-F161-1-XXXX / sms_BRD_neutral.fm / 16.10.06

ion 4,

.09.

2005

You cannot send messages.
1. You have not requested the CLIP service

(Calling Line Identification Presentation).

Ask your service provider to enable this

service.

2. SMS transfer was interrupted (e.g. by an

incoming call).

Re-send the SMS.

3. Network provider does not support this

feature.

4. No number or an invalid number is entered

for the SMS centre set as the active send

service centre.

Enter the number (page 40).

You receive an incomplete SMS.
1. Your phone's memory is full.

Delete old SMS messages (page 37).

2. The provider has not yet sent the rest of the

message.

You have stopped receiving SMS messages.
1. You have changed the ID of your mailbox.

Give your SMS contacts your new ID or

undo the change (page 39).

2. You have not activated your mailbox.

Activate your mailbox (page 39).

3. Call forwarding is activated with

When: All

Calls

or the call forwarding

All Calls

is acti-

vated for the network mailbox.

Change the call forwarding.

The message is played back.
1. The 'display call number' service is not acti-

vated.

Ask your service provider to activate this

function (chargeable).

2. Mobile phone operator and fixed network

SMS service provider have not agreed on a

cooperation.

Obtain information from your fixed net-

work SMS service provider.

3. Your terminal is recorded by your SMS pro-

vider as having no fixed network SMS func-

tionality, i.e. you are no longer registered

with the provider.

Start the registration assistant for auto-

matic registration (see page 34).
– Have the device (re-)registered to

receive SMS messages.

Messages are only received during the day.
1. The terminal is recorded in your SMS pro-

vider's database as having no fixed network

SMS functionality, i.e. you are no longer

registered with the provider.

Start the registration assistant for auto-

matic registration (see page 34).

Have the device (re-)registered to

receive SMS messages (see above).

Summary of Contents for Aton CL700 IP











































































































Search results

Summary of Contents for Aton CL700 IP

Reviews:

Related manuals for Aton CL700 IP

Brands by name

Popular brands

Swisscom Aton CL700 IP, User Giude

Search results

Summary of Contents for Aton CL700 IP

Reviews:

Related manuals for Aton CL700 IP

Brands by name

Popular brands