Explanation for the service “SMS over the fixed network”
Note:
The network operator must support the SMS function.
The SMS service allows the transmission or reception of text messages to other
devices. One message can have up to 160 characters. SMS service can only be
used, if the device supports the display of the subscriber number (CLIP).
In order to receive a SMS it is necessary that you have already sent
at least one SMS.
The sending number 062 210 00 0 for SMS centre 1 and receiving number
062 210 00 0 for SMS centre 2 are already preinstalled for Swisscom.
If the phone is connected to a PBX do not forget to enter the access code
(e. g. 0) before the number of the SMS centre 1.
You can send and receive the SMS (Short Message
Service) messages. You can write, read, edit and
delete messages.
Note:
To send and receive a message, you have to
enter the call number of the service centre of your
service provider.
At delivery state the number of the service centre of
Swisscom is pre-programmed
(sending and receiving: 062 210 00 0).
23
Message (SMS)
Copy one entry:
ó
Select the entry you whish to copy and press
Option
.
ó
Select
Copy Entry
and confirm by pressing
OK
.
Copy all entries:
ó
Press
Option
.
ó
Select
Copy all
and confirm by pressing
OK
.
22
