Swisscom Aton CL111, User Manual

Page: 15 / 64

13
20405092en_ba_a0
Setting up the telephone
Charging the batteries
The batteries are not yet charged when you first unpack the telephone. Insert the hand-
set in the base station for charging. The flashing battery symbol on the handset shows
the charging status. The batteries will take around 14 hours to fully charge.
Note • Do not insert the handset in the base station without batteries.
• Do not use any other type of charging unit since this may damage the
batteries.
The following symbols indicate the charging status on the handset display:
Charging status “full”
Charging status “1/2”
Charging status “empty”
Once the new batteries have been inserted, the display on the handset indicates the
actual charging status only after a complete charging cycle.
Your telephone is now ready to use.
Important!
Please note: after you have inserted the batteries for the first time, the battery display
will indicate the correct information on the charging status only after a complete charg-
ing cycle.
Use only the supplied rechargeable batteries NiMH AAA 800 mAh Model
No. GP80AAAHC. Never use disposable batteries/primary cells.