Swisscom Aton CL111, User Manual

Page: 57 / 64

55
20405092en_ba_a0
Maintenance
Reset
You can reset the telephone to default status as follows:
1. Press the softkey under MENU . Scroll to MAINTENANCE in the SETTINGS menu.
Press OK to confirm.
2. Select the handset or base station, press RESET and press OK to confirm. The default
settings are restored.
Note • A reset deletes all preferences and lists except the directory.
• After a reset, the installation assistant re-appears.
Software version
You can view the actual software version:
Press the softkey under MENU . Scroll to
MAINTENANCE
,
SOFTWARE VERSION
in the
SETTINGS menu. Press OK to confirm.
Installation assistant
You can activate the installation assistant in this menu:
Press the softkey under MENU . Scroll to
MAINTENANCE
,
INSTALL. ASSISTANT
in the
SETTINGS
menu. Press OK to confirm.
Faults and trouble-shooting
Not every malfunction results from a defect in your telephone. Sometimes you only need
to briefly interrupt the power supply on the base station (unplug the mains unit and plug
it in again) or remove and re-insert the batteries in the handset.
Important: Problems or faults can only be corrected if you take the complete device
(base station, handset and connector cable) to the sales outlet!