![Swisscom Fixnet Classic S128 Manual Download Page 7](http://html1.mh-extra.com/html/swisscom-fixnet/classic-s128/classic-s128_manual_1415100007.webp)
6
Preparing to use the phone
Gigaset C340 / SWZ-engl NUR für INTERNET / xxxxxxxxxxx / starting.fm / 17.5.05
u
If you buy a replacement phone cord in
the shops make sure that the phone
jack has the correct type of wiring.
Setting up the handset for use
Inserting the batteries
¤
Fit the batteries with the
correct
polarity.
¤
Position the battery cover against the
edge
1
and push down until it clicks
home.
Opening the battery cover
¤
Push the catch
2
towards the loud-
speaker
1
and lift the cover up.
Placing the handset in the base and
registering it
¤
Place the handset in the charging cra-
dle of the base unit with its
display
facing forward
.
The handset registers automatically. Reg-
istration takes around 1 minute. While this
is happening,
Registering
appears in the
display and the name of the base,
Base 1
,
flashes. The handset is given the lowest
available internal number (1–6). When
the handset has registered, this number
appears in the display, e.g.
INT 1
. This
means that the handset has been allo-
cated the first internal number. If all inter-
nal numbers 1–6 have been assigned (six
handsets are registered on a base), the
number 6 is overwritten if that handset is
in idle status.
¤
Leave the handset in the charging cra-
dle in the base to charge up the
batteries.
Correct phone jack wiring
1 unused
2 unused
3 a
4 b
5 unused
6 unused
Caution:
Use only the rechargeable batteries recom-
mended on page 38! Under no circumstances
should you use a conventional (non recharge-
able) battery or other battery types as this
could cause significant damage to health and
property, e.g. the outer casing of the batteries
could be destroyed or the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
3
2
1
4
5
6
1
Notes:
– Automatic registration is not possible when
the base on which you wish to register the
handset is being used to make a call.
– A key press cancels automatic registration.
– If automatic registration does not work the
handset will have to be registered manually
– The name of the handset can be changed
2
1