![Swisscom Fixnet Classic S128 Manual Download Page 34](http://html1.mh-extra.com/html/swisscom-fixnet/classic-s128/classic-s128_manual_1415100034.webp)
33
Handset settings
Gigaset C340 / SWZ-engl NUR für INTERNET / xxxxxxxxxxx / settings_bs_hs.fm / 17.5.05
Setting ringer melody
Set different ringer melodies for external
and internal calls.
§Menu§
¢
Audio Settings
¢
Ringer Melody
Select
External Calls
/
Internal
Calls
and press
§OK§
.
q
Select melody (
‰
= on) and
press
§OK§
.
a
Long
press (idle status).
Activating/deactivating the ringer
You can turn off the ringer on your hand-
set before you take a call or while the
phone is in the idle state. The ringer can-
not be re-activated while an external call is
in progress.
Deactivating the ringer
P
Press the star key and hold
until you can no longer hear
the ringer tone.
Re-activating the ringer
P
Press the star key
long
.
Activating/deactivating
suppression of the first ring tone
The phone identifies an incoming SMS
from the first network signal.
§Menu§
5 4 O 1 O
1
§OK§
To suppress the first ring tone.
Or:
Q
§OK§
To hear the first ring tone.
Please note:
If first ringer tone suppression is deacti-
vated, then every incoming SMS will be
signalled by a ring tone. If you take this
type of "call" at the first ring tone, you will
lose the SMS.
Activating/deactivating
advisory tones
Your handset uses ‘advisory tones’ to tell
you about different activities and statuses.
The following advisory tones can be acti-
vated and deactivated independently of
each other:
u
Key beep
: Each key press is acknowl-
edged.
u
Acknowledge tones
:
–
Confirmation beep
(rising tone
sequence): at the end of an entry/
setting, when the handset is placed
in the base station and on arrival of
an SMS or a new entry in the calls
list.
–
Error beep
(descending tone
sequence): when you make an
incorrect entry.
–
Menu end tone
: when scrolling at
the end of a menu.
u
Battery low beep
: the battery needs to
be charged.
The confirmation beep when the handset
is placed in the base cannot be deacti-
vated.
Activating/deactivating key beep/
acknowledge tones
§Menu§
¢
Audio Settings
¢
Advisory Tones
Select
Key Tones
/
Confirmation-
Tone
and press
§OK§
(
‰
= on).
Setting the battery low beep
§Menu§
¢
Audio Settings
¢
Advisory Tones
¢
Battery Low
On
/
Off
/
During Call
Select
On
/
Off
/
During Call
and
press
§OK§
(
‰
= on). The bat-
tery low beep is activated/
deactivated/sounds during a
call.