37
Appendix
Gigaset C340 / SWZ-engl NUR für INTERNET / xxxxxxxxxxx / appendix.fm / 17.5.05
Warranty/Maintenance/Repair/
Authorisation
Warranty
The warranty period is 2 years as of the
date of purchase.
For warranty repair, the warranty card,
filled out and stamped by the place of pur-
chase must be included with the defective
device.
Excluded from the warranty are damages
due to improper use, wear and tear, or
tampering by others. The warranty does
not include consumed materials and defi-
ciencies which only affect the value or
capability for use inconsiderably.
In case of an error, please contact your
place of purchase.
Repair/Maintenance
Rental devices
If your phone does not operate properly,
notify Technical Assistance (phone
number 175).
The repair *) and the fault action are free
of charge.
Purchased devices
Repair services are performed free of
charge within the warranty period in
accordance with the regulation of the
warranty certificate. If a repair is neces-
sary, the device must be returned to the
place of purchase.
If Technical Assistance is made available
(during the warranty period as well), the
fault action is charged (route lump sum
price as well as time expenses). The repair
costs are additional outside the warranty
period.
Batteries
Battery cells are considered consumed
material, which is not covered by the war-
ranty service. Defective batteries are not
replaced free of charge. This applies to
rental and purchased devices.
Help
If you have any general questions about
products, services, etc., please contact
your Swisscom Information Centre (toll-
free number 0800 800 800).
You hear no ring tone/dial tone.
The base's telephone line cord has been
replaced.
¥
When buying a replacement line cord,
ensure that the line plug has the correct
type of wiring (page 6) .
Call charges are not displayed.
1. Your network service provider does not
support this service.
2. There are no metering pulses.
¥
Ask your network service provider to
transmit metering pulses.
3. Call charge display is not activated.
¥
Activate the function (page 18).
4. Charges per unit are set to "00.00".
¥
Set the charge per unit (page 18).
The other party cannot hear you.
You have pressed the
u
(
§INT§
) key. The hand-
set is "muted".
¥
The caller's number is not displayed despite
CLIP
.
Number identification is not enabled.
¥
The
caller
should ask his network service
provider to activate calling line identifica-
tion (CLI).
You hear an error tone when keying an
input
(a descending sequence of tones).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the operat-
ing instructions if necessary.
