MANUAL S.BEAT |
24
S.BEAT MP3 |
APPENDIX
8.3 FAQ
WHY I CAN‘T LISTEN „STEREO“ SOUND WITH MY S.BEAT EARPHONES?
Fully insert the earphone jack into the plug. Otherwise, the sound might be
mono (only one channel of the earphones is activated).
HOW CAN I RESET MY S.BEAT?
Manually reset the device with a paper clip on the side, while it is still plugged
to the PC.
HOW CAN I CHARGE MY S.BEAT WITHOUT USING A COMPUTER?
In order to be able to charge your s.beat player without a computer, you can
buy from the webshop www.swissbit-shop.com the World Travel Adapter with
integrated USB charger. This enables charging the player in multiple countries
and it is at the same time a multi-adapter for the laptop or other devices.
DOES THE S.BEAT MP3 PLAYER HAVE A 3.5 MM HEADPHONE CONNECTOR?
No, the s.beat MP3 Player has a 2.5 mm earplug-/line-in-connector. Standard
3.5 mm headphones, as well as original 2.5 mm earplugs, can be used in order to
provide remote control.
WHY IS THE S.BEAT A SPORTSMAN
WITH AMBITIONS TO MAKE IT TO THE OLYMPICS?
The s.beat is delivered with an armband with a rubber case, whose role is to hold
the player. With it, the player is always in close range mounted on the arm and
disturbs neither when jogging nor when moving (left and right-handers are
considered). The provided earphones were especially developed for the active
listener, because they lie comfortably and well fitted in the ear. When the player
is not used, the caps don?t hang on the chest, neither the whole unit must be
taken out.
MY S.BEAT MP3 PLAYER IS NOT RECOGNIZED BY THE PC.
You are using Windows 98 and you haven‘t yet installed the necessary driver.
Please remove the s.beat MP3 Player first and install the driver as described in
the manual.
WHERE CAN I GET THE LATEST FIRMWARE OF S.BEAT MP3 PLAYER?
Download the service program for the Firmware upgrade from our Downloads
section. After installing the service program on your computer, follow the
corresponding instructions of the Firmware upgrade program.
EVEN IF I KEEP THE NAVIGATION KEY PRESSED,
THE LCD-DISPLAY REMAINS BLANK.
The lateral switch of the remote control is in the “OFF“ position. Commute the
switch in center position in order to activate the MP3 Player. Please check the
battery charge of the equipment and charge the device if necessary at a free
USB port of your computer or at a hub. If you are using a USB hub, make sure
that the hub is attached to its power supply.
