OSV-STAR / Scan'O'Vision STAR camera
Version 2.0
3434.505.02
Page 15
3.9
Camera firmware update
Be sure the camera is connected to the computer, powered on and is running (boot
sequence finished). If the OSV-STAR software is running, exit it.
Launch the
Firmware.exe
utility tool from the
OSV-STAR\Camera_firmware
sub-
directory.
Verify the “Erase old configuration values” is
not checked
.
Press
“
Update the OSV7 Camera
” button to connect your OSV7 camera. After a few
seconds, the software prompts you to select the archive directory you want to install,
select the C:\OSV-STAR\Camera_firmware directory and then the sub-directory with
the latest version of firmware for your camera model:
If the number “555” is present on (or near) the descriptive sticker (see location on
chapter
1.1.4
), you should use firmware
OSV_STAR
_CAMERA_MODEL_v_..., in
other case use firmware
OSV7
_CAMERA_MODEL_x10_&_x20_v_...
If you chose a firmware which isn’t for your camera model, software will inform you,
upgrade will not be done and you will have to chose another firmware.
Validate by clicking on the "OK" button, the upgrade starts.
